Offset Pilot — Tool & Work Offset ManagerCompatible with Haas® Next Generation Controls

OFS file editor for Haas NGC tool and work offsets

Open and edit Haas NGC .OFS backup files, compare tool and work offsets, and keep your projects and tool libraries together.

Offset Pilot is designed specifically for working with HAAS® Next Generation Control (NGC) OFFSETS backup files.

It allows you to open, review, edit, manage, and export tool offsets and work offsets stored in HAAS NGC .OFS backup files.

Compatibility
HAAS® Next Generation Control (NGC)
File type
OFFSETS backup file (.OFS)
Purpose
Managing Tool Offsets, Work Offsets, and related offset data

Prepare your offsets. Make setup easier.

Review and organise offset data before working at the machine — with a workspace you can use at your desk or on the shop floor.

Help reduce machine setup time

Prepare tool and work offsets in advance. Compare files and review changes before export to help reduce repetitive data entry and time spent preparing offsets at the control.

Work comfortably with offset data

Open OFS files in clear tables, edit supported values, compare two files and return to saved projects. Keep tool and work offset data organised in one workspace.

Use your phone or tablet

Access the responsive browser editor on desktop, tablet or mobile. Review offset data near the machine and continue working from the device that suits your task.

Free Editor and Pro Editor features

Start with the free editing workspace. Choose Pro Editor when you need OFS export and ENCY.TOM import.

Free Editor

Open, review, edit and compare your offset data.

  • Open Haas NGC .OFS backup files in your browser.
  • Edit supported Tool Offsets and Work Offsets; review read-only Pockets.
  • Compare two OFS files or saved projects in synchronised tables.
  • Save projects to your account after signing in.
  • Keep personal tool libraries and default settings after signing in.
  • Use the responsive editor on desktop, tablet or mobile.

Pro Editor

All Free Editor features, plus:

  • EXPORT .OFS — Export your project as a validated Haas NGC OFS file.
  • IMPORT Ency.TOM — Import supported tool data from ENCY CAM .TOM files, up to 2 MB.

Sign-in and active Pro access are required for these features. Server-side OFS export also requires an internet connection.

PRO EDITOR TRIAL

Try Pro Editor free for 15 days

Explore the complete workflow: prepare and compare your offsets, import your ENCY tool list and export a Haas NGC OFS file.

For eligible new customers. Card required. Your selected paid plan starts automatically after the 15-day trial unless cancelled before it ends.

Register for the free trial

Register or sign in, then select an available Pro Editor plan in your account to start the trial.

Working with HAAS NGC Offsets

  1. Open a HAAS NGC OFS or saved project

    Use Open file to open an .OFS OFFSETS backup file created by a HAAS Next Generation Control. To open a previously saved Offset Pilot project, sign in and use My projects.

    Files are read in your browser. Missing rows use defaults; unsupported or duplicate rows are rejected without replacing your project.

  2. Edit Tools and Work Offsets

    Tools has 200 rows and all 17 supported columns. Tool numbers and work offset names are locked. Pockets is read only.

    Pocket assignments: The POCKETS data is preserved in the exported OFS file for compatibility with the HAAS NGC backup format. When the OFS file is loaded on the machine, the control does not use this data to change the machine's current tool-to-pocket assignments. The actual pocket state remains unchanged even if the POCKETS data in the OFS file differs from the current state of the machine.
  3. Compare two files or projects

    Use Compare Mode to open two OFS files or saved projects in synchronized tables. Edit the upper table, review the lower table, and duplicate a selected cell or row from B to A. Export is disabled while comparing.

  4. Save your project

    Sign in and use Save project. My projects opens saved work. Reset uses your saved defaults. Undo restores up to 10 completed cell edits or table operations.

  5. IMPORT Ency.TOM

    Save your tool list as a .TOM file in ENCY CAM. Sign in with Pro Editor or valid Pro Editor Promo access and click IMPORT Ency.TOM to select the .TOM file. The maximum file size is 2 MB.

    Tools are matched to existing rows by tool number. Import updates the supported diameter geometry, length geometry, holder ID, description and tool type fields when values can be resolved. Other tool fields, Work Offsets and Pockets are preserved. Import updates your current project; it does not create new tool rows or automatically save changes to your account.

    Unresolved fields retain their previous values. Check all imported values in Tools before saving or exporting.

  6. EXPORT a HAAS NGC OFS file

    Server export requires internet and Pro Editor or valid Pro Editor Promo access. Numeric tool and axis values are rounded to 4 decimal places. Units are not converted. Use the machine's units.

Important: Offset Pilot is intended for HAAS® Next Generation Control (NGC) OFFSETS backup files. Compatibility with Classic Haas Control (CHC) .OFS files is not currently supported.